Fire Pit

A8 - METAL CLAMP

Method used in parts that will be fixed to poles. The piece will have two to three slots to allow the metal clamp to secure the piece to the respective post.

A7 - ANCHOR - RIBBED ROD

It consists of one or more ribbed rods welded to metal elements that will be fixed directly to the concrete foundation. The piece will later be fixed to the anchor using stainless steel screws.

A6 - DIRECT FASTENING - NEGATIVE

It consists of directly fixing a negative of the part directly to the concrete foundation. The piece will later be fixed to the negative.

A5 - DIRECT FASTENING - DEFORMATION

Permanent fastening method. It consists of the direct fastening of the part directly to the concrete foundation. A slight deformation is made in the part of the piece that is embedded in the ground to prevent any illicit removal.

A4 - METAL DOWEL - HEAD EMBEDDING

Conventional method of fastening. This piece will have countersunk holes, allowing its fastening using the metal dowel (supplied together with the piece). This method allows for easy removal of the part.

A3 - Threaded Rod, Nut and Washer

Conventional method of fastening. The piece will have holes, allowing its fastening with the threaded rod, nut and stainless steel washer (supplied together with the piece). This method allows for the part to be removed.

A2 - RIBBED ROD

Conventional method of permanent fastening. It consists of one or more ribbed rods welded to the piece that will be fixed directly to the concrete foundation.

A1 - WITHOUT FASTENING

Method used on pieces of considerable weight. It consists of positioning the piece in the exact place, with necessary means of movement for its proper placement.

Design Arch. Amélia Santos

CONTACTS

SERVICES

NEWSLETTER

A8 - METAL CLAMP

A7 - ANCHOR - RIBBED ROD

A6 - DIRECT FASTENING - NEGATIVE

A5 - DIRECT FASTENING - DEFORMATION

A4 - METAL DOWEL - HEAD EMBEDDING

A3 - Threaded Rod, Nut and Washer

A2 - RIBBED ROD

A1 - WITHOUT FASTENING

Don't postpone, make it happen